Air - Low Pressure
Working pressure 1.5 MPa | Valve structure one-way shut-off | Applicable fluids Air
• Push plug into the socket for simple and secure connection
• New valve design for low pressure loss to achieve flow rate increase
• End-face seal is achieved when connected
• Enhanced operability with low connection resistance
• End-face seal design is superior to external seal with an O-ring due to no seal damage caused by exhaustion lubrication
• Available only with steel body. Not suitable for water and oil
• Also available with quick connect/disconnect Tube Fitter type
• Air lines
Body material | Steel (Chrome-plated)
Size | Thread and hose barb | 1/4″, 3/8″, 1/2″
Tube barb (Tube fitter) | Polyurethane tube: Outside Dia. ø6 ± 0.1, ø8 ± 0.15, ø10 ± 0.15 Polyamide tube: Outside Dia. ø6 , ø8 , ø10 Fluorine contained resin tube: Outside Dia. ø6 ± 0.07, ø8 ± 0.07, ø10 ± 0.07
Working pressure | MPa | 1.5
kgf/cm2 | 15
bar | 15
PSI | 218
Seal Material | Seal material | Mark | Working temperature range | Remarks
Working temperature range | Nitrile rubber | NBR (SG) | -20°C to +60°C | Standard material
• Above are specifications only for Cuplas. Max working pressure and working temperature range may vary depending on the materials of the tube and the working temperature.
Size/spec chart supplied as image only: HI CUPLA 200-SOCKET_SH TYPE.png, HI CUPLA 200-SOCKET_SM TYPE.png, HI CUPLA 200-SOCKET_SC TYPE.png, HI CUPLA 200-SOCKET_SF TYPE.png
